about_KADMOS()
informs about the present KADMOS version.🗏
ALC
File is a log file that is supplied with each classifier. 🗏
alc
is a parameter for character set selection. ALC_...
🗏ALC_DEFAULT
Full character set of the classifier, ifwlabels
is empty.
ALC_LCALPHA
Small letter
ALC_UCALPHA
Capital letter
ALC_ALPHA
Small letter and capital letter
ALC_NUMERIC
Numbers
ALC_ALPHANUMERIC
Small letter, capital letter and numbers
ALC_SPECIAL
Punctuation marks and special characters
ALC_ACCENT
Accented characters
ALC_ALL
All characters
ALC_GESTURES
Not used at the moment.
alcfill.exe
🗏
alcstrip.exe
🗏
accents
Result for each component. 🗏
alignment
to align the data to byte boundaries 🗏
angle
Rotation angle in degrees 🗏
array
Pointer to an array 🗏
array_type
ARRAY_TYPE_BYTE
orARRAY_TYPE_WCHAR
🗏
base_line
sets the scale - the height of a capital letter such as 'A', 'B' or 'C'. 🗏
bitsperpixel
Contains the number of bits per pixel 🗏
black
provides the percent darkness of the transferred image 🗏 🗏
bmp_buffer
Memory address of the BITMAPINFOHEADER to be converted. 🗏
bold
Returns the stroke thickness of the character, measured in units of half pixel width. 🗏 🗏
boxtext
Like GetFileName for Windows. 🗏
bstr
Result string in VB. 🗏
buffer
Pointer to a memory area in which the data should be written. 🗏
buffsize
Länge von buffer in Byte. 🗏
busy
indicates if the recognition is still working. 🗏 🗏 🗏
char_space_min
,char_space_max
describe the minimum and maximum distances between two characters. 🗏
chopper.exe
Additional sotware for classifier restriction. 🗏
code
Used code page 🗏 🗏
CODE_PAGE
🗏#define CODE_PAGE_437 437 #define CODE_PAGE_720 720 #define CODE_PAGE_737 737 #define CODE_PAGE_850 850 #define CODE_PAGE_852 852 #define CODE_PAGE_855 855 #define CODE_PAGE_857 857 #define CODE_PAGE_858 858 #define CODE_PAGE_866 866 #define CODE_PAGE_874 874 #define CODE_PAGE_1250 1250 #define CODE_PAGE_1251 1251 #define CODE_PAGE_1252 1252 #define CODE_PAGE_1253 1253 #define CODE_PAGE_1254 1254 #define CODE_PAGE_1255 1255 #define CODE_PAGE_1256 1256 #define CODE_PAGE_1257 1257 #define CODE_PAGE_1258 1258 #define CODE_ISO_8859_1 885901 #define CODE_ISO_8859_2 885902 #define CODE_ISO_8859_4 885904 #define CODE_ISO_8859_5 885905 #define CODE_ISO_8859_6 885906 #define CODE_ISO_8859_7 885907 #define CODE_ISO_8859_8 885908 #define CODE_ISO_8859_9 885909 #define CODE_ISO_8859_10 885910 #define CODE_ISO_8859_11 885911 #define CODE_ISO_8859_13 885913 #define CODE_ISO_8859_15 885915 #define CODE_ASCII 1000000 /* Ersatz representation */ #define CODE_UTF_8 2000008 #define CODE_UTF_16 2000016 #define CODE_UTF_32 2000032 /*** special classifier codes */ #define CODE_ASCII_7BIT 1000001 #define CODE_UTF_16_7BIT 2000017
code_wexpand_lig()
provides a string for a ligature label 🗏
color
Contains the color information. COLOR_...
🗏 🗏 🗏 🗏COLOR_BINARY
Black and white image
COLOR_GRAY
gray image
COLOR_RGB
Color image
configurations menu
🗏
content
Found global "area of interest" in the given image. 🗏
data
Pointer to the image content 🗏
deskew_min
Threshold value from which an erection takes place. 🗏
destination
Pointer to a parameter structure for the parameters to be written. 🗏
dictionary
String with the name of the dictionary to be connected (*.hash). 🗏
dimension
Dimension of features. 🗏
dst
Pointer to a result string. 🗏
entry
Entry with the file name in the section. 🗏
errortext
Pointer to a data structure of type re_ErrorText or re_wErrorText. 🗏
expected_areas
Search for rectangles. 🗏
expected_areas_len
Number of specifications that can be found under expected_areas. 🗏
famulus.exe
Program for image viewing and character collection. 🗏
file_title
Pointer to a file 🗏 🗏 🗏 🗏 🗏 🗏 🗏 🗏
filler*
8 Byte Alignment.
fillorder
Alignment of the bytes for IMGTYPE_...
🗏FILLORDER_MSB2LSB
First bit = first pixel.
FILLORDER_LSB2MSB
Last bit = first pixel.
filter
Like GetFileName for Windows. 🗏
font
includes the given font. 🗏#define FONT_HAND 0x00000001 #define FONT_MACHINE 0x00000002 #define FONT_HM (FONT_HAND|FONT_MACHINE) #define FONT_LATIN 0x00000010 #define FONT_FRAKTUR 0x00000020 #define FONT_GREEK 0x00000040 #define FONT_CYRILLIC 0x00000080 #define FONT_ARABIC 0x00000100 #define FONT_FARSI 0x00000200 #define FONT_HEBREW 0x00000400 #define FONT_THAI 0x00000800 #define FONT_LANGUAGE (FONT_LATIN|FONT_FRAKTUR|FONT_GREEK|FONT_CYRILLIC| FONT_ARABIC|FONT_FARSI|FONT_HEBREW|FONT_THAI) #define FONT_OCRA 0x00020000 #define FONT_OCRB 0x00040000 #define FONT_CMC7 0x00080000 #define FONT_E13B 0x00100000 #define FONT_F7B 0x00200000 #define FONT_SEMI 0x00400000 #define FONT_LCD 0x00800000 #define FONT_BRAILLE 0x01000000 #define FONT_NORM (FONT_OCRA|FONT_OCRB|FONT_CMC7|FONT_E13B|FONT_F7B|FONT_SEMI| FONT_LCD|FONT_BRAILLE) #define FONT_LN (FONT_LANGUAGE|FONT_NORM) #define FONT_ALL (FONT_HM|FONT_LN)
FunctionAddress()
for Java and C-Sharp (C #) programmers.
general
This parameter controls the work of re?_do()
🗏GENERAL_LINESHADOW_ONLY
controls the work of re?_do()
GENERAL_LINESHADOW_ONLY
rec_do()
will be terminated after preprocessing
GENERAL_HOOKENGINE_LOADED
signals afterre?_init()
, if a hook engine was found and loaded.
GENERAL_HOOKENGINE_ON
activates a hook engine.
GENERAL_PREP_ONLY
the KADMOS recognition can be switched off.
GENERAL_LINESHADOW_ONLY
for preprocessing a classification is carried out, the KADMOS recognition is turned off.
GENERAL_LINEPOSITION_ONLY
only the necessary preprocessing is carried out, no character recognition.
GENERAL_FEATURES_ONLY
A subsequent call to rep_do () then stops after the feature formation.
GENERAL_HOOKENGINE_LOADED
indicates if another detection engine has been loaded.
GENERAL_HOOKENGINE_ON
A second recognition engine can be activated.
GENERAL_*CALL
is intended for internal use.
GENERAL_RESPELLCALL
Position polling
GENERAL_RECALL
Mask forRECCALL
toGENERAL_RESPELLCALL
GENERAL_REPMULTITHREADING
Threads management
GENERAL_MULTITHREADING
Mask for the multithreading parameters.
GetPointer()
for Java and C-Sharp (C #) programmers.
GetPrivateFileName()
🗏
GetRelGraph()
reads data from one structure into another structure. 🗏
GetRelGrid()
reads data from one structure into another structure. 🗏
GetRelGridParm()
reads data from one structure into another structure. 🗏
GetRelResult(), GetRepResult()
reads data from one structure into another structure. 🗏
grid
for line and box recognition. 🗏 🗏GRID_LINE_H
Horizontal line
GRID_LINE_V
Vertical line
GRID_BOX
Box around one or more characters.
GRID_COMB
Comb with sign.
GRID_ALL
All grid elements
GRID_END
End of the list gridparm
gridparm
Field ofRelGridParm
structures. 🗏 🗏
gridparm_maxlen
indicates the size of the provided memory. 🗏 🗏
h_image_deskewed
Image handle of the erected image. 🗏
h_result_image_bw
Image handle of a black and white version of the segmented subpicture. 🗏
HashMaker.exe
extracts from dictionaries word lists and affix files.
hWND_line_message
if set,rep_do()
sends messages to the described window.🗏
hWND_rec_finished
if set,rec_do()
sends messages to the described window.🗏
hWND_rel_finished
if set,rel_do()
sends messages to the described window.🗏
hWND_rep_finished
if set,rep_do()
sends messages to the described window.🗏
height
Height of an element 🗏 🗏 🗏 🗏 🗏 🗏
HookEngineData
Connection of a hook engine 🗏
hookparm
Connection of a separate function 🗏
struct ReParm hWND_...
Windows Management 🗏
ident
Specification of the error type 🗏
image
🗏 🗏 🗏 🗏 🗏 🗏 🗏 🗏
image_bottom
Lower edge of the character 🗏 🗏
image_deskewed
Twisted positioned images will be erected. 🗏
image_in
Input image for the layout analysis. 🗏
image_number
Picture number 🗏
image_Top
Top of the character 🗏 🗏
imgtype
Specification of image data given in a structure ReImage under data. 🗏IMGTYPE_PIXELARRAY
Storage of the image data as a matrix of the pixels
IMGTYPE_POINTERARRAY
Storage of the image data as a pointer to the line beginnings
IMGTYPE_STROKE
Storage of image data as a field of elementsReStroke
#define IMGTYPE_FEATURE, #define IMGTYPE_FEATURE_*
Recognition of arbitrary objects
info.exe
🗏
inifile
Ini file in which the entries are stored. 🗏
init
Parameters for the initialization. 🗏 🗏 🗏 🗏
interna
do not change 🗏 🗏
italic
returns the skew of the characters 🗏 🗏
ispell_config
Here parameters for the configuration of Ispell can be transferred. 🗏
KADMOS.h
labels, labels2
→wlabels
labels_size
Specifies the maximum size ofwlabels
.
leading_blanks
Entry of how many spaces precede the respective recognition results. 🗏
left
Coordinate 🗏 🗏 🗏 🗏 🗏 🗏
line_space
specifies the line spacing. 🗏
min_height, max_height
minimum and maximum vertical extent of a Grid element. 🗏
max_strokecount
Maximum number of strokes in the image. 🗏
maxlen
Number of characters to be transferred 🗏
min_width, max_width
minimum and maximum horizontal extent of a grid element. 🗏
mode
🗏 🗏
n
Array elements number 🗏 🗏 🗏 🗏
next
Index of the next element inRelGraph
. 🗏
noise_...
Noise removal 🗏noise_diameter_percent
Classify and remove dirt relative to the line thickness, depending on its diameter.
noise_diameter_pixel
Dirt, absolutely in pixels, depending classify and remove from its diameter.
noise_width_percent, noise_length_percent
Classify and remove dirt, relative to the line thickness, via the thickness and length specifications.
noise_width_percent, noise_length_percent
Classify and remove dirt, absolutely in pixels, via thickness and length specifications.
oem_...
Administration of a separate dictionary 🗏oem_spell_lookup
Name of your own, used dictionary.
oem_codepage
The code page used for the own dictionary.
oem_reject_char
The rejection mark needed for the own spellchecker.
oem__wordchars
All characters of all the words of the own used dictionary.
options OPTIONS_...
Working with basic and group labels. 🗏 🗏OPTIONS_BASICLABELS
Specify basic labels
OPTIONS_BASICLABELS_PARM
Use basic labels instead of group labels in the structureReParm
OPTIONS_BASICLABELS_RESULT
Basic labels instead of group labels in the RelResult structure or use RepResult
OPTIONS_EXCLUDE
FoAtrce recognition, force a clear decision or rejection.
OPTIONS_STRICTSELECT
to use if one is sure that disconnected identifiers (labels, alc) never occur.
OPTIONS_FAST_GRID
Enable faster grid removal.
OPTIONS_FAST_REC
causes a faster detection in the handwriting classifiers.
OPTIONS_FAST
causes detection like OPTIONS_FAST_GRID and OPTIONS_FAST_REC together.
OPTIONS_REL_REC_REPEAT
after the first detection, a second modified one is started
OPTIONS_REL_CLEAR
This parameter is intended to support the reading of standard font lines, such as CMC7 or E13b.
orientation
Storing the image lines for IMGTYPE_PIXELARRAY
🗏ORIENTATION_TOPLEFT
The picture lines are stored from top to bottom.
ORIENTATION_BOTLEFT
The picture lines are stored from bottom to top.
page_text()
analyzes the structure and content of a given document. 🗏
parameter
returns the circumscribing rectangle for the whole page. 🗏
parm
is a parameter for the structureReParm
. 🗏 🗏 🗏 🗏
photometric
The distinction of foreground / background. PHOTOMETRIC_...
🗏PHOTOMETRIC_MINISWHITE
Low color values represent background.
PHOTOMETRIC_MINISBLACK
Low color values represent foreground (characters).
pos
informs about the position of the character in the text line. POS_...
🗏POS_NOLINECONTEXT
Recognize signs only from their geometric shape
POS_SOFTLINECONTEXT
the calculated deviation is normalized in this way.
POS_HARDLINECONTEXT
the location of the characters in the line particularly stronge valuate
POS_NOWORDCONTEXT
the characters are recognized only by their geometric shape and their location in the line
prep PREP_...
🗏PREP_NOSPACEREMOVAL
White edge removal turned off.
PREP_NOSPOTREMOVAL
Spot removal switched off.
PREP_AUTO_NOISEREDUCTION
Adaptively controlled dirt removal.
PREP_SCALING
transforms images to a resolution of 300 dpi
PREP_RGBTOGRAY_COLORGRAY
Convert color images to greyscale with mean value.
PREP_RGBTOGRAY_COLORMIN
Convert color images into gray images with color lightening.
PREP_RGBTOGRAY_COLORMAX
Convert color images to gray images with color strengthening.
PREP_GRAYTOBIN_VERY_THIN
creates a black and white image with a very faint blackening from a gray image.
PREP_GRAYTOBIN_THIN
creates a black and white picture with faint blackening from a gray picture.
PREP_GRAYTOBIN_MEDIUM
creates a black and white picture with medium blackening from a gray picture.
PREP_GRAYTOBIN_THICK
creates from a gray picture a black and white picture with strong blackening.
PREP_GRAYTOBIN_VERY_THICK
creates a black and white picture with very strong blackening from a gray picture.
PREP_GRAYTOBIN_UNIFORM
Thresholding is not done adaptively, but with a threshold for the whole picture.
PREP_BINFILTER_VERY_THIN
Character smoothing with heavy thinning.
PREP_BINFILTER_THIN
Character smoothing with thinning.
PREP_BINFILTER_MEDIUM
Character smoothing without thinning
PREP_BINFILTER_THICK
Character smoothing with thickening
PREP_BINFILTER_VERY_THICK
Character smoothing with heavy thickening
PREP_BINFILTER
PREP_REMOVE_BACKGROUND_AUTO
Remove image background with histogram (only for color images).
PREP_REMOVE_BACKGROUND
Remove image background (only for color images)
PREP_INPLACE
the image provided for recognition is overwritten with the filtered or gray to black and white converted image.
private_data
a value set by the user program is returned. 🗏
program
returns the name of the module or subroutine in which the error occurred. 🗏
projection
Projection according to the slope of the beginning and end of the sign on the baseline. 🗏 🗏
reconfig.dll
DLL for setting parameters for the classification. 🗏
reconfig.ini
Initialization file to include reconfig.dll.
reconfig.lib
Library for integrating reconfig.dll.
ReFileHandle
Handle to the file to be read. 🗏
ReImage
🗏
ReImageHandle
🗏
ReInit
🗏
rejects, rejects2
→wrejects
reject_char
Character to be used in case of rejection. 🗏 🗏
reject_level
Confidence value up to which a result character is to be output. 🗏 🗏 🗏 🗏 🗏
reject_limit
determines the confidence value from which alternatives are returned internally. 🗏
ReLayoutResult, ReLayoutData
🗏
RePageParm, RePageResult, RePageData
🗏
ReParm
🗏
reparm
Pointer to a structureReParm
. 🗏 🗏
ReRect
🗏 🗏
RESPELL
🗏
respell_codepage()
internal code page of the connected dictionary. 🗏
respell_config
Configuration of respell 🚧 🗏
respell_do()
Verification or improvement of results by comparison with a dictionary. 🗏
respell_end()
deactivates the loaded dictionary. 🗏
respell_filetitle()
returns the filename of the loaded dictionary. 🗏
respell_font
font restriction for recognition. RESPELL_...
🗏RESPELL_DICTIONARY_COMPLETE
Classifier labels are limited to dictionary labels.
RESPELL_DICTIONARY_CONFIRM
All results are looked up in the dictionary, not just the bad ones.
RESPELL_ALLOW_COMPOUND_WORDS
Connection words are allowed.
respell_freeimages()
Freeing memory of internally collected images. 🗏
respell_init(), respell_winit()
loads the dictionary specified under dictionary. 🗏
respell_lookup()
searches in the activated dictionary for the given word. 🗏
respell_maxlen
Limitation of the length of words to be processed byIspell
. 🗏
respell_reject_char()
🗏
respell_wordchars()
returns the character set of the dictionary. 🗏
ReSpellData
🗏
ReSpellInit
🗏
ReSpellParm
🗏
respellparm
Pointer to a structureReSpellParm
. 🗏 🗏 🗏
ReStroke
Data structure in which strokes are collected. 🗏
RESULT_FLAG_...
🗏 🗏 🗏 🗏RESULT_FLAG_RESPELL_CONFIRMED
Set if confirmed byRESPELL
.
RESULT_FLAG_RESPELL_GENERATED
Set if generated byRESPELL
.
RESULT_FLAG_RESPELL
To query ifRESULT_FLAG_RESPELL_CONFIRMED
orRESULT_FLAG_RESPELL_GENERATED
were set.
RESULT_FLAG_ACCENT_TOP
Set when the accent is over the character.
RESULT_FLAG_ACCENT_BOTTOM
Set when the accent is under the character.
RESULT_FLAG_ACCENT RESULT_FLAG_ACCENT_TOP | RESULT_FLAG_ACCENT_BOTTOM
RESULT_FLAG_ACCENT_START
First element of an accented character.
RESULT_FLAG_ACCENT_MEMBER
Element of an accented character.
RESULT_FLAG_ACCENT_END
Last element of an accented character.
RESULT_FLAG_REC_REPEAT
with a new recognition with special preprocessing.
RESULT_FLAG_REC_COMBINED
when the result has been combined with base and accents.
RESULT_FLAG_BIDI_LTR_EMBEDDING
RESULT_FLAG_BIDI_RTL_EMBEDDING
RESULT_FLAG_BIDI_POP_DIR_FORMAT
RESULT_FLAG_BIDI_LTR_MARK
ESULT_FLAG_BIDI_SPACES_LTR
RESULT_FLAG_BIDI_SPACES_RTL
RESULT_FLAG_BIDI
RESULT_FLAG_NOTEXT
Illustration, graphic or similar
RESULT_FLAG_GRID
Line, box, line grid, or similar
RESULT_FLAG_UNDERLINE
Underlining a text line
RESULT_FLAG_TEXT
Area of text lines
result_height
Height ofresult_image
(can be compressed). 🗏
result_image
describes the position of the image in the overall image, which was transferred for recognition. 🗏
result_number
Index of results inrel_result
. 🗏 🗏
result_text
returned result text. 🗏
result_text_len
Length (number of characters) of the result textresult_text
delivered byrespell_do ()
. 🗏
result_text_maxlen
Maximum number of characters inresult_text
. 🗏
result_width
Width ofresult_image
(can be compressed). 🗏
results
Speicherplatz für the Ergebnis. 🗏
results_size
Ergebnislänge 🗏
resunit
Unit of measure of resolution by the scanning. RESUNIT_...
🗏RESUNIT_NONE
No resolution information.
RESUNIT_INCH
Resolution in inches.
RESUNIT_CENTIMETER
Resolution in cm.
RESUNIT_METER
Resolution in Meter.
rerect
Pointer to a rectangle containing the character position in the line. 🗏
REX_...
🗏 🗏 🗏
REX_IMGREADY
Pre-processing of the image was performed
REX_ERROR
error return
REX_FINISHED
Module is finished.
rgelement
Pointer to a structure to be copied into. 🗏 🗏
rgpelement
copies a data structure into a field of the structureRelGridParm
. 🗏
rrelement
copies a data structure into a field of the structureRelResult
bzwRepResult
. 🗏
rotateimage
Pointer on a field of structures 🗏
rsd
Pointer to the data structureReSpellData
. 🗏
re_ArrayToString(), re_StringToArray()
converts data 🗏
re_bmp2image()
convert to theReImage
format. 🗏
RE_CDO
🚧
re_CharArrayToPointer(), re_PointerToCharArray()
🗏
re_ClearError()
Reset an error that has occurred. 🗏
re_ClearThreadData()
Release of the thread information. 🗏
re_clipboard2image()
puts an image from the clipboard into theReImage
format. 🗏
re_cloneimage()
creates a second identicalReImage
image. 🗏
re_closeimagefile()
closes an image file opened withre_openimagefile()
. 🗏
re_collect_end()
will complete the collection started withre_collect_init()
. 🗏
re_collect_init(), re_collect_winit()
Initialization of a file for data collection. 🗏
re_config_close()
terminates an active configuration dialog. 🗏
re_copyparm()
allows to copy parameters of the structureReParm
into a target structure. 🗏
re_createimage()
allocates memory for the pixels. 🗏
re_DisplayErrorText(), re_wDisplayErrorText()
show the content ofre_ErrorText
andre_wErrorText
at the screen. 🗏
re_DisplayErrorText_bas()
show the content ofre_ErrorText_bas
at the screen. 🗏
re_endofimagefile()
Query of the file end 🗏
re_ErrorText, re_wErrorText, re_ErrorText_bas
error handling 🗏
re_fillimage()
fills a described rectangle of the givenReImage
image with the desired color. 🗏
re_freeimage()
deallocates memory. 🗏
re_free_layout()
Allocated memory is freed. 🗏
re_GetErrorConfig()
is used to query the current settings for error handling. 🗏
re_GetErrorHandler(), re_wGetErrorHandler()
returns the address of a private error function. 🗏
re_GetErrorText(), re_wGetErrorText()
retrieve error messages. 🗏
re_GetErrorText_bas()
fills the data structure oferrtext
. 🗏
re_getpixel()
returns the color of a given pixel. 🗏
re_GetPrivateData()
The value set with reSetPrivateData()
can be queried. 🗏
GetPrivateFileName()
Returns a file name underfile_title
. 🗏
re_hbitmap2image()
A Windows bitmap is converted to theReImage
format. 🗏
re_image2bmp()
An image is converted from theReImag
format to a bitmap format. 🗏
re_image2clipboard()
puts an image with theReImage
format in the clipboard. 🗏
re_image2hbitmap()
converts aReImage
image to HBITMAP handles. 🗏
re_imagehandle2image()
fills the data structure given underimage
. 🗏
re_layout()
analyzes the structure and content of a given document. 🗏
re_layout_deskew
Corrected righting angle of the input image. 🗏
re_layout_result
Field of the results of the layout analysis. 🗏
re_layout_result_len
Number of elements (results) inre_layout_result
. 🗏
re_openimagefile(), re_wopenimagefile()
Open image file 🗏
re_page()
assigns text areas to classifiers. 🗏
re_readimage()
reads an image and allocates appropriate memory. 🗏
re_readimagefile(), re_wreadimagefile()
reads an image into a structure. 🗏
re_readparm(), re_readparm2(), re_readparm3(),
re_wreadparm(), re_wreadparm2(), re_wreadparm3()
reads from an INI file. 🗏
re_rotateimage()
generates a second rotatedReImage
-Bild. 🗏
re_SetErrorConfig()
configures the error handling. 🗏
re_SetErrorHandler(), re_wSetErrorHandler()
use the own error handling. 🗏
re_SetErrorText(), re_wSetErrorText()
writes back values. 🗏
re_SetErrorText_bas()
writes back values. 🗏
re_setpixel()
occupies a pixel with a color. 🗏
re_SetPrivateData()
Set a private value for the case of error. 🗏
re_writeimage(), re_wwriteimage()
Write aReimage
image into a BITMAP file. 🗏
re_writeimagefile()
writes an image into the file given by afile_handle
. 🗏
re_writeparm(), re_writeparm2(), re_writeparm3(),
re_wwriteparm(), re_wwriteparm2(), re_wwriteparm3()
write parameters to an INI file. 🗏
RE_SUCCESS | Return value in case of success. |
---|---|
RE_QUIT | Canceled by the user. |
RE_WARNING | Warning (without further consequences). |
RE_ERROR | General error in the program flow. |
RE_INFO | Return a clear text information. |
Typical errors in the program sequence are additionally characterized. | |
RE_PARAMETERERROR | Faulty parameter supply of a function. |
RE_MEMORYERROR | Memory shortage or incorrect pointers to the memory to be provided. |
RE_FILEERROR | Error by opening, reading, writing, or closing a file. |
RE_PROTECTERROR | Unlicensed KADMOS version. |
RE_SEGMENTATIONERROR | Problems with the segmentation. |
REC
🗏
rec_accent()
Return the elements of an accented character. 🗏
REC_ALT
maximum number of detection alternatives. 🗏
rec_bottom, rec_top
gives the position in the row for each altrnative 🗏 🗏
rec_collect_kernel()
writes the images submitted for recognition into the file. 🗏
rec_config()
allows the classifier configuration. 🗏
rec_do()
starts the recognition. 🗏
rec_end(), rel_end(), rep_end()
deactivates the loaded classifier. 🗏
rec_filetitle()
returns the name of the loaded classifier. 🗏
rec_get_features()
provides access to internal KADMOS features. 🗏
rec_hook
Here you can specify the own function. 🗏
rec_info()
returns labels of a classifier. 🗏
rec_init(), rec_winit()
loads classifiers. 🗏
rec_linker.exe
Additional software to connect classifiers. 🗏
REC_MESSAGE
🗏
rec_top, rec_bottom
gives the position in the row for each altrnative🗏 🗏
rec_value
provides the security of each recognition for each recognized character. 🗏 🗏
rec_wchar
receives the 2-byte identifier of the character🗏 🗏
REC_WCHAR_...
🗏REC_WCHAR_SIZE
Size ofrec_wchar
in bytes.
REC_WCHAR_COUNT
Number of wchar inrec_wchar
.
RECACCENT_MESSAGE
🗏
ReCdoData
🚧 🗏
ReCdoInit
🚧 🗏
ReCdoLine
🚧 🗏
recg
Pointer to a structureRecGraph
. 🗏
RecGraph
🗏
RecData
🗏
recdata
Pointer to a structurerRecData
. 🗏
RecMaker
Program for generating classifiers🗏
RecResult
🗏
REL
🗏
rel_alternative_maximum
returns the maximum number of word alternatives. 🗏
rel_blank_min
returns the limit from which the distances are to be considered as blank.🗏 🗏
rel_blank_width
returns the detected mean width of the blank character. 🗏 🗏
rel_branch
Branching intoRelGraph
. 🗏
rel_branch_len
Branch length inRelGraph
. 🗏
rel_char_space
describes the mean distance between two consecutive characters. 🗏 🗏
rel_clear()
Empty the data structureRelData
. 🗏
rel_codepage
specifies the code page for the recognition results. 🗏
rel_collect_kernel()
writes the images submitted for recognition into the file. 🗏
rel_corr()
Correction run over the filled data structure.RelData
. 🗏
rel_config(), rel_config2(), rel_config3()
allows the classifier configuration. 🗏
rel_deskew
Corrected rotation of the image. 🗏
rel_do()
starts the recognition. 🗏
rel_end()
deactivates the loaded classifier. 🗏
rel_filetitle()
returns the name of the loaded classifier. 🗏
rel_find()
looks in the given picture for a readable line of text with the given number of letters. 🗏
rel_findg()
looks in the given picture for a readable line of text with the given number of letters. 🗏
rel_freeimages()
Memory is freed. 🗏
rel_graph
Pointer to the results of segmentation and classification. 🗏
rel_graph_in
An input graph passed torespell_do()
. 🗏
rel_graph_in_len
Number of elements ofrel_graph_in
. 🗏
rel_graph_len
return the number of recognized individual results. 🗏 🗏 🗏
rel_graph_maxlen
Maximum number of elements inrel_graph
. 🗏
rel_graph_out
The result graph is registered here. 🗏
rel_graph_out_len
Length (number of nodes) of the result graph returned byrespell_do()
. 🗏
rel_graph_out_maxlen
Maximum length (number of nodes) of the result graph. 🗏
rel_graph_start
Start node inRelGraph
. 🗏
rel_grid
returns information about lines or boxes. 🗏 🗏
rel_grid_len
contains the number of actually recognized structure elements. 🗏 🗏
rel_grid_maxlen
contains the number of actually recognized structure elements. 🗏
rel_hook
Here you can specify the own function. 🗏
rel_info()
returns labels of a classifier. 🗏
rel_init(), rel_winit()
loads classifiers. 🗏
rel_lineshadow()
Information about the hand / machine classification of the given image. 🗏
rel_rec_accent_set()
Enter individual characters fromRecData
toRelData
. 🗏
REL_MESSAGE
🗏
rel_recset()
Transfer individual characters from the data structureRecData
to the data structureRelData
. 🗏
rel_repeat
contains the respective data structure ofrel_do()
. 🗏
relresult
Pointer to the results of segmentation and classification. 🗏 🗏
rel_result_in
torespell_do()
passed fieldrel_result
. 🗏
rel_result_in_len
Number of elements ofrel_result_in
. 🗏
rel_result_len
return the number of recognized individual results. 🗏 🗏 🗏
rel_result_maxlen
Maximum number of elements inrel_result
. 🗏
rel_result_out
Here the corresponding resultsRealResult
are entered. 🗏
rel_result_out_len
The number of entered field elements of the returned result. 🗏
rel_result_out_maxlen
Maximum length (number of results) of the result fieldrel_result_out
. 🗏
rel_textline()
occupies a string with the recognition results of one line at a time 🗏
rel_word_value()
supports the connection of dictionaries. 🗏
ReLayoutResult, ReLayoutData
🗏
RelData
🗏
reldata
Pointer to a structureRelData
. 🗏 🗏 🗏
RECLFIND_MESSAGE
🗏
relg
Pointer to a structureRelGraph
. 🗏
RelGraph
RelGraph
describes the row structure and refers to the associated results. 🗏
relgraph
Pointer to a structureRelGraph
. 🗏
RelGrid
🗏
relgrid
Pointer to a structureRelGrid
. 🗏
RelGridParm
🗏
relgridparm
Pointer to a structureRelGridParm
. 🗏
RelResult
🗏
relresult
Pointer to a structureRelResult
bzwRepResult
. 🗏
relr
Pointer to a structureRelResult
. 🗏
REP
🗏
rep_config(), rep_config2(), rep_config3()
allows the classifier configuration. 🗏
rep_deskew
Corrected rotation of the image. 🗏
rep_do()
starts the recognition. 🗏
rep_end()
deactivates the loaded classifier. 🗏
rep_filetitle()
returns the name of the loaded classifier. 🗏
rep_info()
returns labels of a classifier. 🗏
rep_init(), rep_winit()
loads classifiers. 🗏
rep_idcard()
Starts the recognition with image preprocessing and locating the coding lines for ID cards. 🗏
REP_LINE_CNT
🗏
rep_memory
To record the resultsrep_result
(s). 🗏
rep_memory_size
Available memory size forrep_do()
. 🗏
REP_MESSAGE
🗏
rep_repeat
contains the respective data structurerep_do()
. 🗏
rep_result
Pointer on a field of structuresRepResult
. 🗏
REP_RESULT
🗏
rep_result_len
contains the number of determined text lines after callingrep_do()
. 🗏
RepData
🗏
repdata
Pointer to a structureRepData
🗏
repr
Pointer on a field of structuresRepResult
. 🗏
ReParm
🗏
RepResult
🗏
repr_textline(), rep_textline()
occupies a string with the recognition results of one line at a time. 🗏
represult
Pointer to a structureRelResult
bzwRepResult
. 🗏
search_area
Descriptive rectangle of the search area to search boxes, lines and combs. 🗏
section
Section in the ini file. 🗏
SEG_ALT
maximum number of segmentation alternatives. 🗏
seg_value
Segmentation of two partial images. 🗏
SetRelGraph()
copies a data structure into a field of the structureRelGraph
. 🗏
SetRelGrid()
copies a data structure into a field of the structureRelGrid
. 🗏
SetRelResult(),
copies a data structure into a field of the structure
SetRepResult()RelResult
bzwRepResult
. 🗏
Sichten.exe
Program to edit Ras files. 🗏
source
allows to copy parameters of the structureReParm
into a target structure. 🗏
src
Pointer to a ligature label. 🗏
ReImage
🗏
strokecount
Number of transferred pixels atIMGTYPE_STROKE
. 🗏
strokelen
returns the total theh length of the character. 🗏 🗏
subgrid_count
Number of boxes in boxes or combs. 🗏
subimage
Relative section of the picture. 🗏 🗏
systext
An error text reported by the operating system is returned. 🗏
text
An error text is returned. 🗏
text_format
Output format of the text line. TEXT_FORMAT_...
🗏TEXT_FORMAT_ANSI
By default, also applies to CODE_UTF_16 or CODE_UTF_8
TEXT_FORMAT_POSTSCRIPT
Not implemented yet.
TEXT_FORMAT_XML
The output of the results as an XML code page, UTF-8.
TEXT_FORMAT_PDF
Applies to all code pages supported by KADMOS.
TEXT_FORMAT_LEFT_TO_RIGHT
for Latin, Cyrillic, ... mixed with Hebrew, Arabic, ...
TEXT_FORMAT_RIGHT_TO_LEFT
for Hebrew, Arabic, ... mixed with Latin, Cyrillic, ...
TEXT_FORMAT_ACCENTS_BOTTOM_UP
Reorder with accents from bottom to top.
TEXT_FORMAT_ACCENTS_TOP_DOWN
upper accents from top to bottom.
TEXT_FORMAT_KADMOS_MULTIBYTE
Output of multi-byte labels.
TEXT_FORMAT_OMIT_BIDI_CONTROL
for BIDI text without output of 0x202D or 0x202E
TEXT_FORMAT_RELGRAPH_INDICES
Return indexes as a short field, ended with -1
TEXT_FORMAT_RELRESULT_INDICES
Return indexes as a short field, ended with -1
thickness
Stroke thickness 🗏
timestamp
The speed at which the stroke was generated. 🗏
top
coordinate 🗏 🗏 🗏 🗏 🗏 🗏
type
Data type of the KADMOS features (in8, un16, ...). 🗏
typograph
Additional information about the font TYPO_...
🗏TYPO_PROPORTIONAL
Proportional writing can be assumed.
TYPO_EQUIDISTANT
It can be assumed equidistant writing.
TYPO_NOLIGATURES
Disable algorithms for ligature detection.
TYPO_NOTOUCHINGCHARS
It can be assumed that there are no touching signs.
TYPO_NOSEGALTERNATIV
is set to turn off re-recognition runs.
TYPO_4_SEGALTERNATIV
4 segmentation alternatives can be allowed.
TYPO_8_SEGALTERNATIV
8 segmentation alternatives can be allowed.
TYPO_KEEPIMG
is set to directly access the segmented single characters.
TYPO_EXTENDED_SEGMENTATION
Extended segmentation for better results with a slightly longer computation time.
user_data
for free disposal. 🗏
version
Check the correct KADMOS version. 🗏
width
Width of an element. 🗏 🗏 🗏 🗏 🗏 🗏
word
The word to search. 🗏
wordchars
Buffer to record the result. 🗏
wordchars_size
Size of the buffer.wordchars
. 🗏
wParam
for WM_USER messages from RE? _ *
(only windows) 🗏
x*, y*
coordinates 🗏
xresolution, yresolution
Horizontal and vertical resolution of the given image. 🗏
zip_close
Close zip file. 🗏
zip_compressed
Specify zip file. 🗏
zip_open
Open Zip-File. 🗏
zip_read
Read the zip file. 🗏
zip_wcompressed
Specify zip file. 🗏
zip_wopen
Open zip file. The file name is expected in Unicode. 🗏