Index

A - B

about_KADMOS() informs about the present KADMOS version.🗏

ALC File is a log file that is supplied with each classifier. 🗏

alc is a parameter for character set selection. ALC_...🗏

ALC_DEFAULT Full character set of the classifier, if wlabels is empty.

ALC_LCALPHA Small letter

ALC_UCALPHA Capital letter

ALC_ALPHA Small letter and capital letter

ALC_NUMERIC Numbers

ALC_ALPHANUMERIC Small letter, capital letter and numbers

ALC_SPECIAL Punctuation marks and special characters

ALC_ACCENT Accented characters

ALC_ALL All characters

ALC_GESTURES Not used at the moment.

alcfill.exe 🗏

alcstrip.exe 🗏

accents Result for each component. 🗏

alignment to align the data to byte boundaries 🗏

angle Rotation angle in degrees 🗏

array Pointer to an array 🗏

array_type ARRAY_TYPE_BYTE or ARRAY_TYPE_WCHAR 🗏

base_line sets the scale - the height of a capital letter such as 'A', 'B' or 'C'. 🗏

bitsperpixel Contains the number of bits per pixel 🗏

black provides the percent darkness of the transferred image 🗏 🗏

bmp_buffer Memory address of the BITMAPINFOHEADER to be converted. 🗏

bold Returns the stroke thickness of the character, measured in units of half pixel width. 🗏 🗏

boxtext Like GetFileName for Windows. 🗏

bstr Result string in VB. 🗏

buffer Pointer to a memory area in which the data should be written. 🗏

buffsize Länge von buffer in Byte. 🗏

busy indicates if the recognition is still working. 🗏 🗏 🗏

C - E

char_space_min, char_space_max describe the minimum and maximum distances between two characters. 🗏

chopper.exe Additional sotware for classifier restriction. 🗏

code Used code page 🗏 🗏

CODE_PAGE 🗏

#define CODE_PAGE_437                   437
#define CODE_PAGE_720                   720
#define CODE_PAGE_737                   737
#define CODE_PAGE_850                   850
#define CODE_PAGE_852                   852
#define CODE_PAGE_855                   855
#define CODE_PAGE_857                   857
#define CODE_PAGE_858                   858
#define CODE_PAGE_866                   866
#define CODE_PAGE_874                   874

#define CODE_PAGE_1250                 1250
#define CODE_PAGE_1251                 1251
#define CODE_PAGE_1252                 1252
#define CODE_PAGE_1253                 1253
#define CODE_PAGE_1254                 1254
#define CODE_PAGE_1255                 1255
#define CODE_PAGE_1256                 1256
#define CODE_PAGE_1257                 1257
#define CODE_PAGE_1258                 1258

#define CODE_ISO_8859_1              885901
#define CODE_ISO_8859_2              885902
#define CODE_ISO_8859_4              885904
#define CODE_ISO_8859_5              885905
#define CODE_ISO_8859_6              885906
#define CODE_ISO_8859_7              885907
#define CODE_ISO_8859_8              885908
#define CODE_ISO_8859_9              885909
#define CODE_ISO_8859_10             885910
#define CODE_ISO_8859_11             885911
#define CODE_ISO_8859_13             885913
#define CODE_ISO_8859_15             885915

#define CODE_ASCII                  1000000  /* Ersatz representation */
#define CODE_UTF_8                  2000008
#define CODE_UTF_16                 2000016
#define CODE_UTF_32                 2000032

/*** special classifier codes */
#define CODE_ASCII_7BIT             1000001
#define CODE_UTF_16_7BIT            2000017

code_wexpand_lig() provides a string for a ligature label 🗏

color Contains the color information. COLOR_... 🗏 🗏 🗏 🗏

COLOR_BINARY Black and white image

COLOR_GRAY gray image

COLOR_RGB Color image

configurations menu 🗏

content Found global "area of interest" in the given image. 🗏

data Pointer to the image content 🗏

deskew_min Threshold value from which an erection takes place. 🗏

destination Pointer to a parameter structure for the parameters to be written. 🗏

dictionary String with the name of the dictionary to be connected (*.hash). 🗏

dimension Dimension of features. 🗏

dst Pointer to a result string. 🗏

entry Entry with the file name in the section. 🗏

errortext Pointer to a data structure of type re_ErrorText or re_wErrorText. 🗏

expected_areas Search for rectangles. 🗏

expected_areas_len Number of specifications that can be found under expected_areas. 🗏

F - G
famulus.exe Program for image viewing and character collection. 🗏

file_title Pointer to a file 🗏 🗏 🗏 🗏 🗏 🗏 🗏 🗏

filler* 8 Byte Alignment.

fillorder Alignment of the bytes for IMGTYPE_... 🗏

FILLORDER_MSB2LSB First bit = first pixel.

FILLORDER_LSB2MSB Last bit = first pixel.

filter Like GetFileName for Windows. 🗏
font includes the given font. 🗏
```
#define FONT_HAND            0x00000001
#define FONT_MACHINE         0x00000002
#define FONT_HM (FONT_HAND|FONT_MACHINE)

#define FONT_LATIN           0x00000010
#define FONT_FRAKTUR         0x00000020
#define FONT_GREEK           0x00000040
#define FONT_CYRILLIC        0x00000080
#define FONT_ARABIC          0x00000100
#define FONT_FARSI           0x00000200
#define FONT_HEBREW          0x00000400
#define FONT_THAI            0x00000800
#define FONT_LANGUAGE (FONT_LATIN|FONT_FRAKTUR|FONT_GREEK|FONT_CYRILLIC|
                       FONT_ARABIC|FONT_FARSI|FONT_HEBREW|FONT_THAI)

#define FONT_OCRA            0x00020000
#define FONT_OCRB            0x00040000
#define FONT_CMC7            0x00080000
#define FONT_E13B            0x00100000
#define FONT_F7B             0x00200000
#define FONT_SEMI            0x00400000
#define FONT_LCD             0x00800000
#define FONT_BRAILLE         0x01000000
#define FONT_NORM (FONT_OCRA|FONT_OCRB|FONT_CMC7|FONT_E13B|FONT_F7B|FONT_SEMI|
                   FONT_LCD|FONT_BRAILLE)

#define FONT_LN (FONT_LANGUAGE|FONT_NORM)
#define FONT_ALL (FONT_HM|FONT_LN)
              
```
FunctionAddress() for Java and C-Sharp (C #) programmers.

general This parameter controls the work of re?_do() 🗏

GENERAL_LINESHADOW_ONLY controls the work of re?_do()

GENERAL_LINESHADOW_ONLY rec_do() will be terminated after preprocessing

GENERAL_HOOKENGINE_LOADED signals after re?_init(), if a hook engine was found and loaded.

GENERAL_HOOKENGINE_ON activates a hook engine.

GENERAL_PREP_ONLY the KADMOS recognition can be switched off.

GENERAL_LINESHADOW_ONLY for preprocessing a classification is carried out, the KADMOS recognition is turned off.

GENERAL_LINEPOSITION_ONLY only the necessary preprocessing is carried out, no character recognition.

GENERAL_FEATURES_ONLY A subsequent call to rep_do () then stops after the feature formation.

GENERAL_HOOKENGINE_LOADED indicates if another detection engine has been loaded.

GENERAL_HOOKENGINE_ON A second recognition engine can be activated.

GENERAL_*CALL is intended for internal use.

GENERAL_RESPELLCALL Position polling

GENERAL_RECALL Mask for RECCALL to GENERAL_RESPELLCALL

GENERAL_REPMULTITHREADING Threads management

GENERAL_MULTITHREADING Mask for the multithreading parameters.

GetPointer() for Java and C-Sharp (C #) programmers.

GetPrivateFileName() 🗏

GetRelGraph() reads data from one structure into another structure. 🗏

GetRelGrid() reads data from one structure into another structure. 🗏

GetRelGridParm() reads data from one structure into another structure. 🗏

GetRelResult(), GetRepResult() reads data from one structure into another structure. 🗏

grid for line and box recognition. 🗏 🗏

GRID_LINE_H Horizontal line

GRID_LINE_V Vertical line

GRID_BOX Box around one or more characters.

GRID_COMB Comb with sign.

GRID_ALL All grid elements

GRID_END End of the list gridparm

gridparm Field of RelGridParm structures. 🗏 🗏

gridparm_maxlen indicates the size of the provided memory. 🗏 🗏
H - J

h_image_deskewed Image handle of the erected image. 🗏

h_result_image_bw Image handle of a black and white version of the segmented subpicture. 🗏

HashMaker.exe extracts from dictionaries word lists and affix files.

hWND_line_message if set, rep_do() sends messages to the described window.🗏

hWND_rec_finished if set, rec_do() sends messages to the described window.🗏

hWND_rel_finished if set, rel_do() sends messages to the described window.🗏

hWND_rep_finished if set, rep_do() sends messages to the described window.🗏

height Height of an element 🗏 🗏 🗏 🗏 🗏 🗏

HookEngineData Connection of a hook engine 🗏

hookparm Connection of a separate function 🗏

struct ReParm hWND_... Windows Management 🗏

ident Specification of the error type 🗏

image 🗏 🗏 🗏 🗏 🗏 🗏 🗏 🗏

image_bottom Lower edge of the character 🗏 🗏

image_deskewed Twisted positioned images will be erected. 🗏

image_in Input image for the layout analysis. 🗏

image_number Picture number 🗏

image_Top Top of the character 🗏 🗏

imgtype Specification of image data given in a structure ReImage under data. 🗏

IMGTYPE_PIXELARRAY Storage of the image data as a matrix of the pixels

IMGTYPE_POINTERARRAY Storage of the image data as a pointer to the line beginnings

IMGTYPE_STROKE Storage of image data as a field of elements ReStroke

#define IMGTYPE_FEATURE, #define IMGTYPE_FEATURE_* Recognition of arbitrary objects

info.exe 🗏

inifile Ini file in which the entries are stored. 🗏

init Parameters for the initialization. 🗏 🗏 🗏 🗏

interna do not change 🗏 🗏

italic returns the skew of the characters 🗏 🗏

ispell_config Here parameters for the configuration of Ispell can be transferred. 🗏
K - N

KADMOS.h

labels, labels2 → wlabels

labels_size Specifies the maximum size of wlabels.

leading_blanks Entry of how many spaces precede the respective recognition results. 🗏

left Coordinate 🗏 🗏 🗏 🗏 🗏 🗏

line_space specifies the line spacing. 🗏

min_height, max_height minimum and maximum vertical extent of a Grid element. 🗏

max_strokecount Maximum number of strokes in the image. 🗏

maxlen Number of characters to be transferred 🗏

min_width, max_width minimum and maximum horizontal extent of a grid element. 🗏

mode 🗏 🗏

n Array elements number 🗏 🗏 🗏 🗏

next Index of the next element in RelGraph. 🗏

noise_... Noise removal 🗏

noise_diameter_percent Classify and remove dirt relative to the line thickness, depending on its diameter.

noise_diameter_pixel Dirt, absolutely in pixels, depending classify and remove from its diameter.

noise_width_percent, noise_length_percent Classify and remove dirt, relative to the line thickness, via the thickness and length specifications.

noise_width_percent, noise_length_percent Classify and remove dirt, absolutely in pixels, via thickness and length specifications.
O - Q

oem_... Administration of a separate dictionary 🗏

oem_spell_lookup Name of your own, used dictionary.

oem_codepage The code page used for the own dictionary.

oem_reject_char The rejection mark needed for the own spellchecker.

oem__wordchars All characters of all the words of the own used dictionary.

options OPTIONS_... Working with basic and group labels. 🗏 🗏

OPTIONS_BASICLABELS Specify basic labels

OPTIONS_BASICLABELS_PARM Use basic labels instead of group labels in the structure ReParm

OPTIONS_BASICLABELS_RESULT Basic labels instead of group labels in the RelResult structure or use RepResult

OPTIONS_EXCLUDE FoAtrce recognition, force a clear decision or rejection.

OPTIONS_STRICTSELECT to use if one is sure that disconnected identifiers (labels, alc) never occur.

OPTIONS_FAST_GRID Enable faster grid removal.

OPTIONS_FAST_REC causes a faster detection in the handwriting classifiers.

OPTIONS_FAST causes detection like OPTIONS_FAST_GRID and OPTIONS_FAST_REC together.

OPTIONS_REL_REC_REPEAT after the first detection, a second modified one is started

OPTIONS_REL_CLEARThis parameter is intended to support the reading of standard font lines, such as CMC7 or E13b.

orientation Storing the image lines for IMGTYPE_PIXELARRAY 🗏

ORIENTATION_TOPLEFTThe picture lines are stored from top to bottom.

ORIENTATION_BOTLEFTThe picture lines are stored from bottom to top.

page_text() analyzes the structure and content of a given document. 🗏

parameter returns the circumscribing rectangle for the whole page. 🗏

parm is a parameter for the structure ReParm. 🗏 🗏 🗏 🗏

photometric The distinction of foreground / background. PHOTOMETRIC_... 🗏

PHOTOMETRIC_MINISWHITE Low color values represent background.

PHOTOMETRIC_MINISBLACK Low color values represent foreground (characters).

pos informs about the position of the character in the text line. POS_... 🗏

POS_NOLINECONTEXT Recognize signs only from their geometric shape

POS_SOFTLINECONTEXT the calculated deviation is normalized in this way.

POS_HARDLINECONTEXT the location of the characters in the line particularly stronge valuate

POS_NOWORDCONTEXT the characters are recognized only by their geometric shape and their location in the line

prep PREP_... 🗏

PREP_NOSPACEREMOVAL White edge removal turned off.

PREP_NOSPOTREMOVAL Spot removal switched off.

PREP_AUTO_NOISEREDUCTION Adaptively controlled dirt removal.

PREP_SCALING transforms images to a resolution of 300 dpi

PREP_RGBTOGRAY_COLORGRAY Convert color images to greyscale with mean value.

PREP_RGBTOGRAY_COLORMIN Convert color images into gray images with color lightening.

PREP_RGBTOGRAY_COLORMAX Convert color images to gray images with color strengthening.

PREP_GRAYTOBIN_VERY_THIN creates a black and white image with a very faint blackening from a gray image.

PREP_GRAYTOBIN_THIN creates a black and white picture with faint blackening from a gray picture.

PREP_GRAYTOBIN_MEDIUMcreates a black and white picture with medium blackening from a gray picture.

PREP_GRAYTOBIN_THICK creates from a gray picture a black and white picture with strong blackening.

PREP_GRAYTOBIN_VERY_THICK creates a black and white picture with very strong blackening from a gray picture.

PREP_GRAYTOBIN_UNIFORM Thresholding is not done adaptively, but with a threshold for the whole picture.

PREP_BINFILTER_VERY_THIN Character smoothing with heavy thinning.

PREP_BINFILTER_THIN Character smoothing with thinning.

PREP_BINFILTER_MEDIUM Character smoothing without thinning

PREP_BINFILTER_THICK Character smoothing with thickening

PREP_BINFILTER_VERY_THICK Character smoothing with heavy thickening

PREP_BINFILTER

PREP_REMOVE_BACKGROUND_AUTO Remove image background with histogram (only for color images).

PREP_REMOVE_BACKGROUND Remove image background (only for color images)

PREP_INPLACE the image provided for recognition is overwritten with the filtered or gray to black and white converted image.

private_data a value set by the user program is returned. 🗏

programreturns the name of the module or subroutine in which the error occurred. 🗏

projection Projection according to the slope of the beginning and end of the sign on the baseline. 🗏 🗏
R

reconfig.dll DLL for setting parameters for the classification. 🗏

reconfig.ini Initialization file to include reconfig.dll.

reconfig.lib Library for integrating reconfig.dll.

ReFileHandle Handle to the file to be read. 🗏

ReImage 🗏

ReImageHandle 🗏

ReInit 🗏

rejects, rejects2 → wrejects

reject_char Character to be used in case of rejection. 🗏 🗏

reject_level Confidence value up to which a result character is to be output. 🗏 🗏 🗏 🗏 🗏

reject_limit determines the confidence value from which alternatives are returned internally. 🗏

ReLayoutResult, ReLayoutData 🗏

RePageParm, RePageResult, RePageData 🗏

ReParm 🗏

reparm Pointer to a structure ReParm. 🗏 🗏

ReRect 🗏 🗏

RESPELL 🗏

respell_codepage() internal code page of the connected dictionary. 🗏

respell_config Configuration of respell 🚧 🗏

respell_do() Verification or improvement of results by comparison with a dictionary. 🗏

respell_end() deactivates the loaded dictionary. 🗏

respell_filetitle() returns the filename of the loaded dictionary. 🗏

respell_fontfont restriction for recognition. RESPELL_... 🗏

RESPELL_DICTIONARY_COMPLETEClassifier labels are limited to dictionary labels.

RESPELL_DICTIONARY_CONFIRM All results are looked up in the dictionary, not just the bad ones.

RESPELL_ALLOW_COMPOUND_WORDS Connection words are allowed.

respell_freeimages() Freeing memory of internally collected images. 🗏

respell_init(), respell_winit() loads the dictionary specified under dictionary. 🗏

respell_lookup() searches in the activated dictionary for the given word. 🗏

respell_maxlen Limitation of the length of words to be processed by Ispell. 🗏

respell_reject_char() 🗏

respell_wordchars() returns the character set of the dictionary. 🗏

ReSpellData 🗏

ReSpellInit 🗏

ReSpellParm 🗏

respellparm Pointer to a structure ReSpellParm. 🗏 🗏 🗏

ReStroke Data structure in which strokes are collected. 🗏

RESULT_FLAG_... 🗏 🗏 🗏 🗏

RESULT_FLAG_RESPELL_CONFIRMED Set if confirmed by RESPELL.

RESULT_FLAG_RESPELL_GENERATED Set if generated by RESPELL.

RESULT_FLAG_RESPELL To query if RESULT_FLAG_RESPELL_CONFIRMED or RESULT_FLAG_RESPELL_GENERATED were set.

RESULT_FLAG_ACCENT_TOP Set when the accent is over the character.

RESULT_FLAG_ACCENT_BOTTOM Set when the accent is under the character.

RESULT_FLAG_ACCENT RESULT_FLAG_ACCENT_TOP | RESULT_FLAG_ACCENT_BOTTOM

RESULT_FLAG_ACCENT_START First element of an accented character.

RESULT_FLAG_ACCENT_MEMBER Element of an accented character.

RESULT_FLAG_ACCENT_END Last element of an accented character.

RESULT_FLAG_REC_REPEAT with a new recognition with special preprocessing.

RESULT_FLAG_REC_COMBINED when the result has been combined with base and accents.

RESULT_FLAG_BIDI_LTR_EMBEDDING

RESULT_FLAG_BIDI_RTL_EMBEDDING

RESULT_FLAG_BIDI_POP_DIR_FORMAT

RESULT_FLAG_BIDI_LTR_MARK

ESULT_FLAG_BIDI_SPACES_LTR

RESULT_FLAG_BIDI_SPACES_RTL

RESULT_FLAG_BIDI

RESULT_FLAG_NOTEXT Illustration, graphic or similar

RESULT_FLAG_GRID Line, box, line grid, or similar

RESULT_FLAG_UNDERLINE Underlining a text line

RESULT_FLAG_TEXT Area of text lines

result_height Height of result_image (can be compressed). 🗏

result_image describes the position of the image in the overall image, which was transferred for recognition. 🗏

result_number Index of results in rel_result. 🗏 🗏

result_text returned result text. 🗏

result_text_len Length (number of characters) of the result text result_text delivered by respell_do (). 🗏

result_text_maxlen Maximum number of characters in result_text. 🗏

result_width Width of result_image (can be compressed). 🗏

results Speicherplatz für the Ergebnis. 🗏

results_size Ergebnislänge 🗏

resunit Unit of measure of resolution by the scanning. RESUNIT_...🗏

RESUNIT_NONE No resolution information.

RESUNIT_INCH Resolution in inches.

RESUNIT_CENTIMETERResolution in cm.

RESUNIT_METER Resolution in Meter.

rerect Pointer to a rectangle containing the character position in the line. 🗏

REX_... 🗏 🗏 🗏

REX_IMGREADY Pre-processing of the image was performed

REX_ERROR error return

REX_FINISHED Module is finished.

rgelement Pointer to a structure to be copied into. 🗏 🗏

rgpelement copies a data structure into a field of the structure RelGridParm. 🗏

rrelement copies a data structure into a field of the structure RelResult bzw RepResult. 🗏

rotateimage Pointer on a field of structures 🗏

rsd Pointer to the data structure ReSpellData. 🗏

re_

re_ArrayToString(), re_StringToArray() converts data 🗏

re_bmp2image() convert to the ReImage format. 🗏

RE_CDO 🚧

re_CharArrayToPointer(), re_PointerToCharArray() 🗏

re_ClearError() Reset an error that has occurred. 🗏

re_ClearThreadData() Release of the thread information. 🗏

re_clipboard2image() puts an image from the clipboard into the ReImage format. 🗏

re_cloneimage() creates a second identical ReImage image. 🗏

re_closeimagefile() closes an image file opened with re_openimagefile(). 🗏

re_collect_end() will complete the collection started with re_collect_init(). 🗏

re_collect_init(), re_collect_winit() Initialization of a file for data collection. 🗏

re_config_close() terminates an active configuration dialog. 🗏

re_copyparm() allows to copy parameters of the structure ReParm into a target structure. 🗏

re_createimage() allocates memory for the pixels. 🗏

re_DisplayErrorText(), re_wDisplayErrorText() show the content of re_ErrorText and re_wErrorText at the screen. 🗏

re_DisplayErrorText_bas() show the content of re_ErrorText_bas at the screen. 🗏

re_endofimagefile() Query of the file end 🗏

re_ErrorText, re_wErrorText, re_ErrorText_bas error handling 🗏

re_fillimage() fills a described rectangle of the given ReImage image with the desired color. 🗏

re_freeimage() deallocates memory. 🗏

re_free_layout() Allocated memory is freed. 🗏

re_GetErrorConfig() is used to query the current settings for error handling. 🗏

re_GetErrorHandler(), re_wGetErrorHandler() returns the address of a private error function. 🗏

re_GetErrorText(), re_wGetErrorText() retrieve error messages. 🗏

re_GetErrorText_bas() fills the data structure of errtext. 🗏

re_getpixel() returns the color of a given pixel. 🗏

re_GetPrivateData() The value set with re SetPrivateData() can be queried. 🗏

GetPrivateFileName() Returns a file name under file_title. 🗏

re_hbitmap2image() A Windows bitmap is converted to the ReImage format. 🗏

re_image2bmp() An image is converted from the ReImag format to a bitmap format. 🗏

re_image2clipboard() puts an image with the ReImage format in the clipboard. 🗏

re_image2hbitmap() converts a ReImage image to HBITMAP handles. 🗏

re_imagehandle2image() fills the data structure given under image. 🗏

re_layout() analyzes the structure and content of a given document. 🗏

re_layout_deskew Corrected righting angle of the input image. 🗏

re_layout_result Field of the results of the layout analysis. 🗏

re_layout_result_len Number of elements (results) in re_layout_result. 🗏

re_openimagefile(), re_wopenimagefile() Open image file 🗏

re_page() assigns text areas to classifiers. 🗏

re_readimage() reads an image and allocates appropriate memory. 🗏

re_readimagefile(), re_wreadimagefile() reads an image into a structure. 🗏

re_readparm(), re_readparm2(), re_readparm3(), re_wreadparm(), re_wreadparm2(), re_wreadparm3() reads from an INI file. 🗏

re_rotateimage() generates a second rotated ReImage-Bild. 🗏

re_SetErrorConfig() configures the error handling. 🗏

re_SetErrorHandler(), re_wSetErrorHandler() use the own error handling. 🗏

re_SetErrorText(), re_wSetErrorText() writes back values. 🗏

re_SetErrorText_bas() writes back values. 🗏

re_setpixel() occupies a pixel with a color. 🗏

re_SetPrivateData() Set a private value for the case of error. 🗏

re_writeimage(), re_wwriteimage() Write a Reimage image into a BITMAP file. 🗏

re_writeimagefile() writes an image into the file given by a file_handle. 🗏

re_writeparm(), re_writeparm2(), re_writeparm3(), re_wwriteparm(), re_wwriteparm2(), re_wwriteparm3() write parameters to an INI file. 🗏

RE_...

`RE_SUCCESS`	Return value in case of success.
`RE_QUIT`	Canceled by the user.
`RE_WARNING`	Warning (without further consequences).
`RE_ERROR`	General error in the program flow.
`RE_INFO`	Return a clear text information.
Typical errors in the program sequence are additionally characterized.
`RE_PARAMETERERROR`	Faulty parameter supply of a function.
`RE_MEMORYERROR`	Memory shortage or incorrect pointers to the memory to be provided.
`RE_FILEERROR`	Error by opening, reading, writing, or closing a file.
`RE_PROTECTERROR`	Unlicensed KADMOS version.
`RE_SEGMENTATIONERROR`	Problems with the segmentation.

REC

REC 🗏

rec_accent() Return the elements of an accented character. 🗏

REC_ALT maximum number of detection alternatives. 🗏

rec_bottom, rec_top gives the position in the row for each altrnative 🗏 🗏

rec_collect_kernel() writes the images submitted for recognition into the file. 🗏

rec_config() allows the classifier configuration. 🗏

rec_do()starts the recognition. 🗏

rec_end(), rel_end(), rep_end() deactivates the loaded classifier. 🗏

rec_filetitle() returns the name of the loaded classifier. 🗏

rec_get_features() provides access to internal KADMOS features. 🗏

rec_hook Here you can specify the own function. 🗏

rec_info() returns labels of a classifier. 🗏

rec_init(), rec_winit() loads classifiers. 🗏

rec_linker.exe Additional software to connect classifiers. 🗏

REC_MESSAGE 🗏

rec_top, rec_bottom gives the position in the row for each altrnative🗏 🗏

rec_value provides the security of each recognition for each recognized character. 🗏 🗏

rec_wchar receives the 2-byte identifier of the character🗏 🗏

REC_WCHAR_... 🗏

REC_WCHAR_SIZE Size of rec_wchar in bytes.

REC_WCHAR_COUNT Number of wchar in rec_wchar.

RECACCENT_MESSAGE 🗏

ReCdoData 🚧 🗏

ReCdoInit 🚧 🗏

ReCdoLine 🚧 🗏

recg Pointer to a structure RecGraph. 🗏

RecGraph 🗏

RecData 🗏

recdata Pointer to a structurer RecData. 🗏

RecMaker Program for generating classifiers🗏

RecResult 🗏
REL

REL 🗏

rel_alternative_maximum returns the maximum number of word alternatives. 🗏

rel_blank_min returns the limit from which the distances are to be considered as blank.🗏 🗏

rel_blank_width returns the detected mean width of the blank character. 🗏 🗏

rel_branch Branching into RelGraph. 🗏

rel_branch_len Branch length in RelGraph. 🗏

rel_char_space describes the mean distance between two consecutive characters. 🗏 🗏

rel_clear() Empty the data structure RelData. 🗏

rel_codepage specifies the code page for the recognition results. 🗏

rel_collect_kernel() writes the images submitted for recognition into the file. 🗏

rel_corr() Correction run over the filled data structure. RelData. 🗏

rel_config(), rel_config2(), rel_config3() allows the classifier configuration. 🗏

rel_deskew Corrected rotation of the image. 🗏

rel_do()starts the recognition. 🗏

rel_end() deactivates the loaded classifier. 🗏

rel_filetitle() returns the name of the loaded classifier. 🗏

rel_find() looks in the given picture for a readable line of text with the given number of letters. 🗏

rel_findg() looks in the given picture for a readable line of text with the given number of letters. 🗏

rel_freeimages() Memory is freed. 🗏

rel_graph Pointer to the results of segmentation and classification. 🗏

rel_graph_in An input graph passed to respell_do(). 🗏

rel_graph_in_len Number of elements of rel_graph_in. 🗏

rel_graph_len return the number of recognized individual results. 🗏 🗏 🗏

rel_graph_maxlen Maximum number of elements in rel_graph. 🗏

rel_graph_out The result graph is registered here. 🗏

rel_graph_out_len Length (number of nodes) of the result graph returned by respell_do(). 🗏

rel_graph_out_maxlen Maximum length (number of nodes) of the result graph. 🗏

rel_graph_start Start node in RelGraph. 🗏

rel_grid returns information about lines or boxes. 🗏 🗏

rel_grid_len contains the number of actually recognized structure elements. 🗏 🗏

rel_grid_maxlen contains the number of actually recognized structure elements. 🗏

rel_hook Here you can specify the own function. 🗏

rel_info() returns labels of a classifier. 🗏

rel_init(), rel_winit() loads classifiers. 🗏

rel_lineshadow() Information about the hand / machine classification of the given image. 🗏

rel_rec_accent_set() Enter individual characters from RecData to RelData. 🗏

REL_MESSAGE 🗏

rel_recset() Transfer individual characters from the data structure RecData to the data structure RelData. 🗏

rel_repeat contains the respective data structure of rel_do(). 🗏

relresult Pointer to the results of segmentation and classification. 🗏 🗏

rel_result_in to respell_do() passed field rel_result. 🗏

rel_result_in_len Number of elements of rel_result_in. 🗏

rel_result_len return the number of recognized individual results. 🗏 🗏 🗏

rel_result_maxlen Maximum number of elements in rel_result. 🗏

rel_result_out Here the corresponding results RealResult are entered. 🗏

rel_result_out_len The number of entered field elements of the returned result. 🗏

rel_result_out_maxlen Maximum length (number of results) of the result field rel_result_out. 🗏

rel_textline() occupies a string with the recognition results of one line at a time 🗏

rel_word_value() supports the connection of dictionaries. 🗏

ReLayoutResult, ReLayoutData 🗏

RelData 🗏

reldata Pointer to a structure RelData. 🗏 🗏 🗏

RECLFIND_MESSAGE 🗏

relg Pointer to a structure RelGraph. 🗏

RelGraph RelGraph describes the row structure and refers to the associated results. 🗏

relgraph Pointer to a structure RelGraph. 🗏

RelGrid 🗏

relgrid Pointer to a structure RelGrid. 🗏

RelGridParm 🗏

relgridparm Pointer to a structure RelGridParm. 🗏

RelResult 🗏

relresult Pointer to a structure RelResult bzw RepResult. 🗏

relr Pointer to a structure RelResult. 🗏
REP

REP 🗏

rep_config(), rep_config2(), rep_config3() allows the classifier configuration. 🗏

rep_deskew Corrected rotation of the image. 🗏

rep_do() starts the recognition. 🗏

rep_end() deactivates the loaded classifier. 🗏

rep_filetitle() returns the name of the loaded classifier. 🗏

rep_info() returns labels of a classifier. 🗏

rep_init(), rep_winit() loads classifiers. 🗏

rep_idcard() Starts the recognition with image preprocessing and locating the coding lines for ID cards. 🗏

REP_LINE_CNT 🗏

rep_memory To record the results rep_result(s). 🗏

rep_memory_size Available memory size for rep_do(). 🗏

REP_MESSAGE 🗏

rep_repeat contains the respective data structure rep_do(). 🗏

rep_result Pointer on a field of structures RepResult. 🗏

REP_RESULT 🗏

rep_result_len contains the number of determined text lines after calling rep_do(). 🗏

RepData 🗏

repdata Pointer to a structure RepData 🗏

repr Pointer on a field of structures RepResult. 🗏

ReParm 🗏

RepResult 🗏

repr_textline(), rep_textline() occupies a string with the recognition results of one line at a time. 🗏

represult Pointer to a structure RelResult bzw RepResult. 🗏
S

search_area Descriptive rectangle of the search area to search boxes, lines and combs. 🗏

section Section in the ini file. 🗏

SEG_ALT maximum number of segmentation alternatives. 🗏

seg_value Segmentation of two partial images. 🗏

SetRelGraph() copies a data structure into a field of the structure RelGraph. 🗏

SetRelGrid() copies a data structure into a field of the structure RelGrid. 🗏

SetRelResult(), SetRepResult() copies a data structure into a field of the structure RelResult bzw RepResult. 🗏

Sichten.exe Program to edit Ras files. 🗏

source allows to copy parameters of the structure ReParm into a target structure. 🗏

src Pointer to a ligature label. 🗏

ReImage 🗏

strokecount Number of transferred pixels at IMGTYPE_STROKE. 🗏

strokelen returns the total theh length of the character. 🗏 🗏

subgrid_count Number of boxes in boxes or combs. 🗏

subimage Relative section of the picture. 🗏 🗏

systext An error text reported by the operating system is returned. 🗏
T - Z

text An error text is returned. 🗏

text_format Output format of the text line. TEXT_FORMAT_... 🗏

TEXT_FORMAT_ANSI By default, also applies to CODE_UTF_16 or CODE_UTF_8

TEXT_FORMAT_POSTSCRIPT Not implemented yet.

TEXT_FORMAT_XML The output of the results as an XML code page, UTF-8.

TEXT_FORMAT_PDF Applies to all code pages supported by KADMOS.

TEXT_FORMAT_LEFT_TO_RIGHT for Latin, Cyrillic, ... mixed with Hebrew, Arabic, ...

TEXT_FORMAT_RIGHT_TO_LEFT for Hebrew, Arabic, ... mixed with Latin, Cyrillic, ...

TEXT_FORMAT_ACCENTS_BOTTOM_UP Reorder with accents from bottom to top.

TEXT_FORMAT_ACCENTS_TOP_DOWN upper accents from top to bottom.

TEXT_FORMAT_KADMOS_MULTIBYTE Output of multi-byte labels.

TEXT_FORMAT_OMIT_BIDI_CONTROL for BIDI text without output of 0x202D or 0x202E

TEXT_FORMAT_RELGRAPH_INDICES Return indexes as a short field, ended with -1

TEXT_FORMAT_RELRESULT_INDICES Return indexes as a short field, ended with -1

thickness Stroke thickness 🗏

timestamp The speed at which the stroke was generated. 🗏

top coordinate 🗏 🗏 🗏 🗏 🗏 🗏

type Data type of the KADMOS features (in8, un16, ...). 🗏

typograph Additional information about the font TYPO_... 🗏

TYPO_PROPORTIONAL Proportional writing can be assumed.

TYPO_EQUIDISTANT It can be assumed equidistant writing.

TYPO_NOLIGATURES Disable algorithms for ligature detection.

TYPO_NOTOUCHINGCHARS It can be assumed that there are no touching signs.

TYPO_NOSEGALTERNATIV is set to turn off re-recognition runs.

TYPO_4_SEGALTERNATIV 4 segmentation alternatives can be allowed.

TYPO_8_SEGALTERNATIV 8 segmentation alternatives can be allowed.

TYPO_KEEPIMG is set to directly access the segmented single characters.

TYPO_EXTENDED_SEGMENTATION Extended segmentation for better results with a slightly longer computation time.

user_data for free disposal. 🗏

version Check the correct KADMOS version. 🗏

width Width of an element. 🗏 🗏 🗏 🗏 🗏 🗏

word The word to search. 🗏

wordchars Buffer to record the result. 🗏

wordchars_size Size of the buffer. wordchars. 🗏

wParam for WM_USER messages from RE? _ * (only windows) 🗏

x*, y* coordinates 🗏

xresolution, yresolution Horizontal and vertical resolution of the given image. 🗏

zip_close Close zip file. 🗏

zip_compressed Specify zip file. 🗏

zip_open Open Zip-File. 🗏

zip_read Read the zip file. 🗏

zip_wcompressed Specify zip file. 🗏

zip_wopen Open zip file. The file name is expected in Unicode. 🗏